Osciladores MomentumBuying PressureHistogram Disponible en Builder
Bulls Power
Bulls Power measures how far buyers can push the bar's high above an EMA baseline. It isolates one side of the market rather than netting both, which is why it is normally read together with Bears Power as the two halves of Elder's Ray system.
- Default period
- 13
- Centre
- Zero line
- Pairs with
- Bears Power
Ilustrativo — datos sintéticos, no una cotización en vivo.
What Bulls Power tells you
Most oscillators net buying and selling into one number. Bulls Power deliberately does not: it reports only how far above a moving baseline the buyers managed to take the bar. Read alone it is one-sided by design; read next to Bears Power it shows which side is actually doing the work.
- Above zero: buyers pushed the high past the baseline
- Below zero: even the high stayed under it — unusual, and a strong bearish reading
- Rising while still negative: selling pressure is easing
- 1 Take an EMA of the close over 13 bars
- 2 Subtract it from the bar's high
- 3 Draw the difference around zero
Mostrar la fórmula y detalles de cálculo
Bulls Power is a one-line calculation measured against a moving baseline:
- Compute an exponential moving average of the close over the chosen period — 13 bars by default.
- Subtract it from the current bar’s high:
Bulls Power = High − EMA(Close, 13). - Draw the result as a histogram around zero on buffer 0.
Using the high rather than the close is the whole idea. The close tells you where the bar settled after both sides had finished; the high tells you the furthest point buyers managed to reach at any moment during it. Measuring that reach against a lagging average turns it into a question about pressure rather than about outcome — buyers may have failed to hold the level, but Bulls Power records that they got there.
The reading is unbounded and scales with the instrument, so a value of 0.0009 on EUR/USD and 3.2 on an index can describe equally strong buying. Only the sign, the direction of change, and the comparison against Bears Power transfer between symbols.
In MQL5 the call is iBullsPower(symbol, period, ma_period) and it returns a handle to a single buffer. There is no applied-price argument — MT4’s version had one and MT5’s does not. Alexander Elder introduced the Elder-Ray system, of which this is one half, in Trading for a Living.
Señales
Las señales distintivas y testeables que ofrece Bulls Power — y el régimen adecuado para cada una.
Turning Up Below Zero
Listo en BuilderPaired With Bears Power
Listo en BuilderDivergence
Lógica avanzadaImplementación en MT5
Lo que MetaTrader 5 calcula y dibuja realmente: la referencia de cada regla de esta página.
Búferes
| Índice | Búfer | Dibujado en MT5 como | Qué contiene |
|---|---|---|---|
| 0 | MAIN_LINE | Histogram | High minus the EMA of the same period, drawn as a histogram around zero. Positive means buyers pushed the bar above the baseline. One buffer and one colour — MT5 does not recolour the bars that cross to the negative side, and there is no signal line to cross. |
Notas de la plataforma
Funciona mejor / usar con cuidado
Ningún indicador tiene ventaja universal. Aquí es donde Bulls Power ayuda — y donde engaña.
Funciona mejor
- Alongside Bears Power
- Trending markets
- Higher timeframes
- As a confirmation rather than a trigger
Usar con cuidado
- Read entirely on its own
- Comparing values across instruments
- Very short baseline periods
- Optimised periods without validation
Crear una estrategia Bulls Power
Conecta la señal a las reglas de entrada y salida, luego exporta un EA MT5 compilable — sin código.
- Bulls Power (13)
- Bears Power (13)
- Bulls Power above zero → Open Buy · SL 40 / TP 80
- Bears Power below zero → Open Sell
Combinar Bulls Power con otros indicadores
Un indicador raramente se sostiene solo. Estas combinaciones cubren los puntos ciegos de Bulls Power.
Bulls Power + Bears Power
- Bulls Power above zero
- Bears Power below zero
- Two-sided rule
Bulls Power + Moving Average
- Price > MA
- Bulls Power turning up
- Buy
No single-flow template pairs Bulls Power with a moving average. Start from Elder Ray and add an MA node with a Price node into a Compare.
Abrir el Builder →Bulls Power + MACD
- MACD above zero
- Bulls Power above zero
- Buy
No single-flow template pairs Bulls Power with MACD — the portfolio template that holds both runs them as separate legs. Start from Elder Ray and add MACD nodes.
Abrir el Builder →Parámetros
Valores iniciales para validar en tu propio par y temporalidad — no son configuraciones garantizadas.
| Parámetro | Valor predeterminado | Rango de prueba sugerido | Qué hace |
|---|---|---|---|
| Period | 13 | 8–21 | Length of the EMA baseline the high is measured against. Elder's 13 is the standard; shorter makes the baseline track price so closely that the reading hovers near zero. |
| Level | 0 | — | Your level, not an indicator input. Zero is the natural reference because it marks the baseline itself; other levels have no built-in meaning. |
| Shift | 0 | 0–3 | Which bar back the value is read from. Shift 1 compares against a fully closed bar. |
Ajustes preestablecidos iniciales
Reactive 8 Baseline tracks price closely
Standard 13 Elder's default baseline
Slow 21 Larger, rarer excursions
Ejemplos de mercado
Dónde Bulls Power funciona, dónde falla y cómo un filtro cambia el resultado.
Both halves agree
Bulls Power holds above zero while Bears Power lifts off its lows — buyers are reaching past the baseline and sellers are losing depth.
One side read alone
Bulls Power is positive during a downtrend simply because the bar's high sits above a lagging EMA. Without the other half the reading looks bullish and is not.
Trend filter supplies direction
With a moving-average condition attached, the same positive readings inside a downtrend are all skipped — pressure and direction are different questions.
Indicadores relacionados
FAQ
- Should I use Bulls Power on its own?
- It is not designed for that. Elder's Ray is a two-part system: Bulls Power measures how far buyers reach above a baseline, Bears Power how far sellers reach below it. Either half in isolation describes one side of a market that has two. The Builder's Elder Ray template holds both for exactly this reason.
- Why does Bulls Power have no applied-price setting in MT5?
- Because the MQL5 signature dropped it. iBullsPower takes only symbol, timeframe and MA period — the EMA baseline is on the close and the measurement is from the high. MT4's version did accept an applied price, so a ported strategy loses that argument with no error and no warning.
- What does a negative Bulls Power mean?
- That even the bar's high failed to reach the EMA baseline — buyers could not lift price to its own recent average at any point in the bar. It is a genuinely weak reading and comparatively rare, which is why 'rising while still negative' is a more useful signal than the sign alone.
- What period should I use?
- 13 is Elder's default and the Builder template's baseline. Shortening it makes the EMA hug price so closely that Bulls Power collapses toward zero and stops distinguishing anything; lengthening it produces larger, rarer excursions. Re-validate on your own pair and timeframe rather than porting a number.
- Can I build a Bulls Power EA without coding?
- Yes. The Elder Ray template wires both Bulls and Bears nodes into Compare nodes against zero, with the period as an EA input — and because both live in the same flow, a genuine two-sided rule needs nothing extra. Divergence is the exception and requires custom MQL5.
- How should I validate settings before going live?
- Backtest on quality tick data first, then run the EA on a demo account before risking money. When optimising, hold back data the search never saw and prefer settings that stay profitable across periods over the single in-sample peak — chasing that peak is overfitting the noise. No default or preset here is a performance promise; every value is a starting point to re-validate on your own pair and broker.
Artículos relacionados
Glossary