المذبذبات OscillatorExhaustionReversal متاح في المنشئ
DeMarker
DeMarker compares how much of the recent range came from new highs against how much came from new lows, and returns the result as a ratio between 0 and 1. It answers a narrower question than RSI — it reads the bar extremes rather than the closes — and its scale is 0 to 1, not 0 to 100.
- Default period
- 14
- Overbought
- 0.7
- Oversold
- 0.3
توضيحي — بيانات اصطناعية، ليست تسعيرة مباشرة.
What DeMarker tells you
DeMarker asks which side of the market has been making progress. For each bar it measures how far the high extended beyond the previous high, and how far the low extended below the previous low. Averaged over the period, the two are expressed as one ratio: near 1 almost all the movement has been upward extension, near 0 almost all of it downward. The reading is about the extremes of the bars, which is why it can look different from an oscillator built on closes.
- Above 0.7: buyers have been taking almost all the new ground
- Below 0.3: sellers have
- The scale is 0 to 1 — 0.7 here is not the same number as RSI's 70
- 1 Measure how far each high beat the previous high
- 2 Measure how far each low undercut the previous low
- 3 Average both and take up ÷ (up + down)
عرض الصيغة وتفاصيل الحساب
DeMarker is a ratio built from bar extremes rather than closing prices:
- For each bar, take
DeMax = high − high[1]when this high is above the previous one, and 0 otherwise. - Take
DeMin = low[1] − lowwhen this low is below the previous one, and 0 otherwise. - Average both over the period and divide:
DeM = SMA(DeMax) / (SMA(DeMax) + SMA(DeMin)).
Because the numerator is part of the denominator, the result cannot leave the range 0 to 1. A value of 0.5 means new highs and new lows have extended by the same total amount over the window; 0.9 means almost all the new ground has been made upward.
In MQL5 the call is iDeMarker(symbol, period, ma_period) — a period and nothing else. There is deliberately no applied-price argument: the formula already names which prices it uses, and no single series could stand in for both the high and the low.
The scale is the thing to get right. DeMarker’s boundaries are conventionally 0.3 and 0.7, and they are not RSI’s 30 and 70 with a decimal point moved for convenience — they are the actual numbers this indicator produces. A rule written as DeMarker < 30 is legal MQL5, compiles without complaint, and is true on every bar the market has ever printed, because the maximum possible reading is 1. The condition then contributes nothing and the EA trades on whatever else is in the flow. This is the single most common way the indicator is misused, and nothing in the platform warns about it. The subtler version of the same mistake is worth knowing too: a threshold can be on the right scale and still mean something different. The Ultimate Oscillator runs 0 to 100 exactly as RSI does and is drawn with the same 70 and 30 lines, yet measured on identical series it sits above 70 for 1.13% of bars against RSI’s 4.94% — legal, plausible, and four times rarer than intended.
The other thing worth knowing is what an extreme actually means. DeMarker at 0.85 says buyers have taken nearly all the new ground over the last fourteen bars. That is a description of what has happened, not a prediction that it will stop — in a real trend the reading can stay up there for dozens of bars while price keeps making highs. Which is why the Builder’s template does not trade 0.3 on its own: it first requires ATR to be below its value twenty bars earlier, so the rule only fires once the market has stopped extending. The extreme says where price is; the volatility condition says whether fading it is a sensible thing to do.
الإشارات
الإشارات المتميزة والقابلة للاختبار التي يوفرها DeM — والنظام الملائم لكل منها.
Midpoint Crossover
جاهز في المنشئExhaustion in a Trend
جاهز في المنشئDivergence from Price
منطق متقدمتنفيذ MT5
ما يحسبه ويرسمه ميتاتريدر 5 فعليًا — وهو المرجع الذي كُتبت وفقه كل قاعدة في هذه الصفحة.
المخازن
| الفهرس | المخزن | طريقة الرسم في MT5 | ما يحتويه |
|---|---|---|---|
| 0 | MAIN_LINE | Line | The ratio itself, bounded between 0 and 1. There is one buffer and no signal line — anything drawn over DeMarker on a chart is a second indicator. |
ملاحظات المنصة
يعمل بشكل أفضل / استخدم بحذر
لا يوجد مؤشر ذو ميزة شاملة. إليك أين يساعد DeM — وأين يضلل.
يعمل بشكل أفضل
- Ranging or contracting markets
- Together with a filter that establishes there is no trend
- Instruments whose highs and lows are meaningful (not heavily gapped)
- Higher timeframes, where single spikes matter less
استخدم بحذر
- Trending markets — the reading can sit above 0.7 for a long time
- Reading 0.7 / 0.3 as if they were RSI's 70 / 30
- Acting on an extreme with no second condition
- Very short periods, where one wide bar moves the whole ratio
بناء استراتيجية DeM
اربط الإشارة بقواعد الدخول والخروج، ثم صدّر EA MT5 قابلاً للترجمة — بدون كود.
- DeMarker read at the current bar
- Compare it against 0.3 for the long side, 0.7 for the short side
- ATR read at the current bar, and a second ATR node read 20 bars back
- Compare the two — the current one being smaller means volatility is contracting
- DeMarker below 0.3 and ATR contracting → Open Buy · SL 40 / TP 80
- Stop then trails at 2× ATR
دمج DeM مع مؤشرات أخرى
نادراً ما يقف مؤشر واحد وحده. هذه التوليفات تغطي النقاط العمياء لـ DeM.
DeM + ATR
- DeMarker below 0.3
- ATR below its value 20 bars ago
- Buy
DeM + ADX
- ADX below 20
- DeMarker below 0.3
- Buy
No single-flow template pairs DeMarker with ADX. Start from DeMarker Reversal + ATR Squeeze and replace the ATR comparison with an ADX node and a Compare at 20.
افتح المنشئ →DeM + Bollinger Bands
- Price at the lower band
- DeMarker below 0.3
- Buy
No single-flow template pairs DeMarker with Bollinger Bands. Start from DeMarker Reversal + ATR Squeeze and add a Bollinger node with a Compare against Price.
افتح المنشئ →المعاملات
قيم أولية للتحقق على زوجك الخاص وإطارك الزمني — ليست إعدادات مضمونة.
| المعامل | الافتراضي | نطاق الاختبار المقترح | ما يفعله |
|---|---|---|---|
| Period | 14 | 5–50 | How many bars of highs and lows the ratio averages. Shorter periods swing between the extremes on a single wide bar; longer ones describe the week rather than the moment. 14 is the documented default and a baseline to re-validate, not portable truth. |
| Shift | 0 | 0–30 | Which bar back the node reads the buffer from. Two DeMarker nodes at different shifts is how a rule expresses 'the reading is turning', since the indicator has no signal line of its own. |
| Applied price | — | — | There is none. The calculation reads each bar's high and low directly, so there is no single series to choose. An applied-price input on a DeMarker is a sign the indicator is not MT5's standard one. |
الإعدادات المسبقة الأولية
Fast 7 Reacts within the session; more extreme readings
Standard 14 MT5's default, and the template's
Slow 25 Fewer extremes, each meaning more
أمثلة السوق
أين يعمل DeM، وأين يفشل، وكيف يغير الفلتر النتيجة.
Fade inside a quiet range
DeMarker drops below 0.3 while ATR is well under its level twenty bars earlier. The market has stopped extending, and the reversal has room to work.
The same reading inside a trend
DeMarker is below 0.3 but ATR is expanding — price is making genuinely new lows. Buying here is fading a move that has not finished, which is the case the volatility condition exists to remove.
The ATR condition blocks the trade
A run of extreme readings during a volatility expansion is skipped entirely, and the account avoids a sequence of entries against the dominant direction.
المؤشرات ذات الصلة
FAQ
- Is DeMarker just RSI with different numbers?
- No. They answer similar questions but read different data. RSI averages the size of up closes against down closes; DeMarker measures how far each bar's high extended beyond the previous high and how far each low undercut the previous low. A bar that swings widely and closes unchanged barely moves RSI but does move DeMarker. The two also live on different scales — 0 to 1 here, 0 to 100 there.
- Why is my DeMarker rule always true?
- Almost certainly because the threshold was written as 30 or 70. DeMarker cannot exceed 1, so 'below 30' is true on every bar and 'above 70' is never true. Nothing errors — the condition is simply meaningless, and the EA trades on whatever else is in the flow. Use 0.3 and 0.7.
- What period should I use?
- 14 is MT5's default and the right starting point. Below about 7 a single wide bar can push the ratio to an extreme, and above about 25 the readings describe the week rather than the current move. Treat any number as something to re-validate on your pair and timeframe rather than as a setting that transfers.
- Can I trade DeMarker extremes on their own?
- Not reliably. In a trending market the reading stays at an extreme while price keeps going, so an unfiltered rule fades every leg of a move that is still running. That is why the Builder template requires ATR to be contracting before it acts — the extreme says where the market is, and something else has to say whether fading it is sensible.
- Can I build a DeMarker EA without coding?
- Yes. The DeMarker Reversal + ATR Squeeze template compares DeMarker against 0.3 and 0.7, and requires ATR to be below its value twenty bars back before either side can fire. The period, both levels, the ATR lookback and the trailing multiple are all EA inputs.
- How should I validate settings before going live?
- Backtest on quality tick data, then run on a demo account before risking money. Because this is a reversal rule, pay particular attention to how the equity curve behaves during strong trends rather than to the headline profit — that is where this family of strategies does its damage. Hold back data the search never saw and prefer settings that stay profitable across periods.
مقالات ذات صلة
Glossary